Search

By size

Inside diameter, mm:
From To
Outside diameter, mm:
From To
Height (width), mm:
From To
Prices are valid for 28.03.2024

Labeling of glands of the Turkish brand SUPTEX

Glands (reinforced cuffs) are used as seals for rotating shafts. Each manufacturer can give their own designation cuffs, but in the absolute majority of cases, the buyer can easily choose the glands in size.

As for the variations of types of glands for design features, here it is necessary to refer directly to the manufacturer's catalogs.

The numbers before the opening bracket are the dimensions of the packing in millimeters: "The diameter of the gland seat on the shaft" x "The outer diameter of the gland" x "Height (width) of the gland / Height (width) of the gland with the boot". In parentheses are listed designations of design features. The last four digits after the hyphen are the internal code SUPTEX, unique for each gland.

Below is a table with decoding marking glands for the Turkish company SUPTEX, given photos as a good example. The table contains almost all the manufacturer’s marking codes, with the exception of those glands that our company does not supply.

Code SUPTEX Explanation Example
G With figured execution of an external collar 25x47/64x7/10,5(KK-N.6.G.T1)-8972
H Spiral on the inner surface 133,35x158,75x11,11/13(KK-H.L.T1)-7905
KK Reinforced rubberized 12x37x7(KK-T)-7252
L Left direction of rotation 133,35x158,75x12,7(KK-H.L.T)-7301
N The boot is pointing inwards (towards the spring) 35x52/65x7/10,5(KK-N.6.G.T1)-8973
O Special 49,17x100x8/9,8(KK-O.V)-8807
R Right direction of rotation 100x125x12(KK-4.R.T)-8655
SL Metal not rubberized frame 19x37x10(SL-R.T)-8444
SKL With thickened (double) frame for increased pressure resistance 82x121/100x12/20(SKL-O)-9510
SLK With thickened (double) frame 66,67x95,3x15,87(SLK-Y)-9025
T Anther 22,22x31,75x5,5(KK-T)-9011
TT Double boot 37x66x9,5/12(KK-TT)-9604
U With extended working sponge 18x30x7/10(KK-U.CT)-6174
V V-shaped notches on the inner surface (for left and right spindles) 46x65x16(SL-T.V.O)-9822
Y With felt insert 66,67x95,3x15,87(SLK-Y)-9025
CT With double working sponge (double acting) 18x30x7/10(KK-U.CT)-6174
DC Execution for non-rotating shaft and rotating body (opposite to standard) 60,22x89,5x7/7,5(SL-DC.5.O)-9553
Mk Design for non-rotating shaft and rotating mixing cabinet (opposite to standard) 120x165x10/14,8(Mk)-8475
Tf Teflon coating 117,6x146,15x12,1/15(SKL-TF)-9762
Tk Gland set 35x50,8x11,5(SL-3..Tk.O)-8869
2 With a shortened working sponge 25,4x38,17x6,5(SL-2.T)-9442
3 The outer surface is half covered with metal, half rubberized 50x60x10(KK-3.4.T)-9097
4 Corrugated on the outer surface 42x58x10(KK-4.T)-8909
5 Non-sprung 35x65/76x10/16(SL-5.6.T.SS)-8596
6 With outer flange 35x65/76x10/16(SL-5.6.T.SS)-8596
7 The second boot protrudes above the rear surface and faces outward. 58x103x11/19(SL-7.R.T.O)-9764

All articles

Last articles

The bearing ex206g2 is a ball bearing that serves as a support for the shafts, its body consists of two rings that are connected by a cage.

Bearing es207g2 is fastened a ball bearing. The bearing consists of two parts – races, inner and outer, connected by a cage. It is self-installing (housing).

The es208g2 bearing is a ball bearing that is attached to the shaft. The two parts, called races, inner and outer, connected by a cage, make up its body.

GE ..- KRR-B snap-in bearings in a wide range with analogues at affordable prices