Search

By size

Inside diameter, mm:
From To
Outside diameter, mm:
From To
Height (width), mm:
From To
Prices are valid for 26.04.2024

Cheap bearings buy firm ST

MIC Bearing - a company that provides a wide selection of bearings. With us you always see the actual prices for bearings in Ukraine - both budget class and premium category. You can buy inexpensive bearings from us on the website.

The category of bearings at a low price is represented, in particular, by the company ST. Below are the most popular bearings of various types.

*Prices are at the time of this writing.
 618/8 zz (2080088 in accordance with GOST) - radial ball bearing 8 * 16 * 5 mm in size. Closed with metal washers, protected from large particles of garbage. Lubricated at the factory and does not require additional care. Also, some manufacturers may be labeled as 688zz.

 6901-2z (1080901 GOST) - single-row radial ball, closed type. Size 12 24 6 mm. Marking is applied on metal covers by embossing or electro etching. In view of the fact that the manufacturer does not give the technical characteristics of this product, it is recommended to use it under light loads.

 6902 zz (GOST 1080902) - ball bearing with one row of rolling elements of balls, 15 * 28 * 7 mm. Closed with metal plates, poorly protected from moisture, however, provides high protection against contamination. Easy to install and maintain, suitable for non-critical sites of inexpensive equipment. Marking option - 61902 zz. Price - 9 UAH.

 6901 2rs (1180901) - radial ball bearing, 12x24x6 mm dimensions. It is closed with plastic covers that do not allow lubricant to flow out of the internal cavity. Sealed, protects against dust and moisture. Maintains lower turns in comparison with the similar, closed metal. Price 8 UAH.

 30204 (7204 in GOST) - tapered roller bearing. 20 * 47 * 15.25 mm. Steel separator. Bearing collapsible, which allows you to install the inner and outer ring to install separately. May require lubrication during operation. Designed for radial loads. It is put into the engines of KamAZ, BelAZ, KrAZ and MAZ trucks. Price - 24 UAH.

 32208 (GOST 7508) - roller tapered collapsible bearing. It works at temperatures from -30 to +110 degrees. Completely made of ball bearing steel. It is possible to install the inner and outer rings separately from one another. MAZ truck steering bearing. Price - 63 UAH.

 608z (80018 in the GOST system) - miniature ball bearing. Installed in the truck heater ZIL-433100. Dimensions 8x22x7 mm. Closed type, metal covers are used as protective covers. Put in an inexpensive hand-held power tool. Price 6 UAH.

 608 2rs (or 180018 GOST) - an analogue of the previous one, differs by the type of protection: rubber covers increase the tightness of the bearing. Lubricated at the factory, easy to maintain and operate. May be modified to open when removing the plugs. The sizes are similar - 8 * 22 * 7. Price 6 UAH.

 51105 (8105 GOST) - ball thrust. Consists of two rings and a separator in which the balls are installed. Designed only for axial loads, do not allow the slightest misalignment of the shaft. They are used in the power steering of the MTZ tractor of the 50 and 52 series. Dimensions 24/42/11 mm. Price 16 UAH.

 GE20ES (ШСП 20) - swivel bearing, referred to the sliding bearings. Withstands shock loads. The outer ring has grooves, there is a slot on the outer ring and lubrication holes. It is widely used in the old technique. Dimensions 20x35x12 mm. Price - 24 UAH.


All articles

Last articles

The bearing ex206g2 is a ball bearing that serves as a support for the shafts, its body consists of two rings that are connected by a cage.

Bearing es207g2 is fastened a ball bearing. The bearing consists of two parts – races, inner and outer, connected by a cage. It is self-installing (housing).

The es208g2 bearing is a ball bearing that is attached to the shaft. The two parts, called races, inner and outer, connected by a cage, make up its body.

GE ..- KRR-B snap-in bearings in a wide range with analogues at affordable prices