Bearing SA 204 analogues AEL 204 ES 204 G2 YET 204 GRAE 20 NPPB UE 204 bearing for John Deere

Bearing SA 204 – self-aligning bearing (installation using an eccentric ring) with a spherical outer ring, sealed on both sides, the rolling elements - balls. Combine bearing, widely used in agriculture. Designed for radial loads and work in the temperature range from -20 to +100 degrees Celsius. The bearing is installed in the body assembly, and the recommended tightening torque for locking screws is 5.5.

Replace the bearing for the combine can be analogues, the marking of which varies depending on the manufacturer: AEL 204, UE204, ES 204 G2 SNR, GRAE 20 NPPB, YET 204.

Main characteristics:

Internal diameter of the bearing, d - 20 mm;  
The maximum outer diameter of the sphere, the size of DSF - 47 mm;  
Bearing width assembly, size B1 - 30.9 mm;  
Bearing width without eccentric ring, size B - 21.4; 
The width of the holder, size C - 14 mm;  
Load capacity is dynamic, C - 9.88 kN;  
Static load capacity, Co - 6.2 kN;  
Maximum speed - 8500 revolutions per minute;   Weight - 0.15 kg.

The ES204G2 bearing can be found at the following crosscodes: 619286.0 (CLAAS), JD39108 (John Deere), 325099 (New Holland). Widely used in CLAAS combines: COMMANDOR 114CS; DOMINATOR 140; LEXION series 4xx (405, 420, 450, 470, 485) and 5xx (510, 520, 530, 560, 580); MEGA 200th and 300th episodes; TUCANO 340, TUCANO 450 TYP C32. CLAAS balers: Quadrant 2000 and 3000 series; VARIANT 180, 260, 280, 350, 360, 370, 385. CLAAS: JAGUAR 800y and 900 series forage harvesters. Combines JOHN DEERE: 1032, 1042, 1052; 1065, 1068; 1072, 1075; 1155, 1166, 1169, 1174, 1177, 1188; 2254, 2256, 2258; 4425, 4435; 925, 930, 940, 942, 950, 965, 975, 985. JOHN DEERE 6359 engine.

The company MIC Bearing offers a wide range of housing bearings and bearings for combines, as well as other agricultural equipment. You can choose the product you need using our catalog.