Bearing CX 606 2RS

The 606 2RS bearing, manufactured by CX, is a miniature single-row deep groove ball bearing of the extra light series, designed for operation in dirty or wet environments in small dimensions.Inner Diameter: 6 mm Outer Diameter: 17 mm Width: 6 mm Type: Deep Groove Ball Bearing, Single Row (Miniature) GOST Analog: 180016 Basic Dynamic Load Rating (C): approximately 2.36 kN Basic Static Load Rating (C0): approximately 0.94 kNThe bearing features a closed design that ensures its longevity: 2RS Protection: Equipped with two contact seals made of Nitrile Butadiene Rubber (NBR) on both sides. The seals provide maximum protection against the ingress of dust, moisture, and the leakage of lubricant.The 2RS design is ideal for humid or dusty environments, but imposes limitations on maximum rotational speed due to increased seal friction.Maintenance: Supplied pre-filled with grease for life (non-separable) and requires no additional maintenance.Loads: The raceway geometry allows the bearing to effectively accommodate radial loads, as well as moderate axial loads (thrust loads) in both directions.Application: The 606 2RS is widely used in miniature mechanisms, medical equipment, fishing reels, quadcopters, and in assemblies requiring a high degree of protection from the external environment.