Oil seals / Oil seals
1) This description is for informational purposes only and we assume no responsibility for any inaccuracies, errors, etc.
2) The weight of less than 0.001 kg is indicated as 0.001 kg
3) The sketch does not contain all the design features of the productGo to purchase
Oil seal SKF 40*55*8 HMSA10RG
| Brand | Country of origin of the brand |
|---|---|
| SKF | Sweden |
The dispatch of the goods is carried out within 1-2 banking days from the order day!
Look at the prices for analogues-substitutes:
| Name | Brand | Photo | Video | Dimensions | Price / Availability |
|---|---|---|---|---|---|
|
Oil seal Oil seal 40x55x8 |
PRC |
 |
d: 40 D: 55 h: 8 Analogues |
29 грн.
Are available
|
|
|
Oil seal Oil seal DICHTOMATIK 40x55x8 WAS NBR |
FIS Dichtomatik |
|
d: 40 D: 55 h: 8 Analogues |
78 грн.
Are available
|
|
|
Oil seal Oil seal 40/55/8 |
Suptex |
|
d: 40 D: 55 h: 8 Analogues |
91 грн. Goods expected Notify me of admission Request a call back |
Look at the prices for analogues-substitutes:
| Notation | Brand | Photo | Dimensions | Price for 1 pc. / Availability |
|---|---|---|---|---|
|
Oil seal Oil seal 40x55x8 |
PRC |
|
d: 40 D: 55 h: 8 Analogues |
29 uah
Are available |
|
Oil seal Oil seal DICHTOMATIK 40x55x8 WAS NBR |
FIS Dichtomatik |
|
d: 40 D: 55 h: 8 Analogues |
78 uah
Are available |
|
Oil seal Oil seal 40/55/8 |
Suptex |
|
d: 40 D: 55 h: 8 Analogues |
91 грн. Goods expected Notify me of admission Request a call back |
Sketch
Characteristics:
(SKF 40*55*8 HMSA10RG)
| Shaft diameter under seal d | d | 40 | mm |
| Outer seal diameter D | D | 55 | mm |
| Height, width of seal h | h | 8 | mm |
| Height, seal width with anther h1 | h1 | 8 | mm |
| Maximum operating temperature, °С | t | 100 | °С |
| Minimum operating temperature, °С | t | -40 | °С |
| Permissible circumferential speed, m/s | v | 6.9 | m/s |
| Rotational speed, r/min | n | 3300 | r/min |
| 0.15 |
2) The weight of less than 0.001 kg is indicated as 0.001 kg
3) The sketch does not contain all the design features of the product
Viewed
Application
40x55x8, 40/55/8, 40-55-8, 40*55*8, 40kh55kh8, CR 40x55x8 HMSA10RG, 40x55x8 HMSA10RG, radial?ne ushchil?nennya valu z humovym zovnishnim diametrom, posylenym metalom, odynarnoyu kromkoyu, yaka ushchil?nyuye, z dopomizhnoyu hubkoyu. Vykorystovuyut?sya dlya utrymannya oliyi abo mastyla mizh komponentamy, shcho obertayut?sya i nerukhomymy, abo mizh komponentamy, shcho znakhodyat?sya v vidnosnomu rusi. Ushchil?nennya dyzaynu HMSA10 mayut? humovyy zovnishniy diametr, shcho dozvolyaye usunuty perekis mizh elementamy mashyn. Vony mayut? dvi kromky: 1- zvychaynu kromku, yaka ushchil?nyuye, z elastomeru z brasletnoyu pruzhynoyu dlya pidtrymky pravyl?noho radial?noho navantazhennya. 2-pylozakhysnu kromku dlya pidvyshchenoho zakhystu vid zabrudnennya. Material kromky, yaka ushchil?nyuye - nitrylovyy kauchuk (NBR), sufiks RG.Ещё74740x55x8, 40/55/8, 40-55-8, 40*55*8, 40х55х8, CR 40x55x8 HMSA10RG, 40x55x8 HMSA10RG: a radial shaft seal featuring a rubber-covered outer diameter, a metal reinforcement, a single sealing lip, and an auxiliary lip. These seals are used to retain oil or grease between rotating and stationary components, or between components in relative motion. HMSA10 design seals feature a rubber-covered outer diameter, which helps accommodate misalignment between machine components. They incorporate two lips: 1) a primary sealing lip made of elastomer, equipped with a garter spring to maintain the correct radial load; and 2) a dust lip for enhanced protection against contamination. The sealing lip is made of nitrile rubber (NBR), indicated by the suffix RG.
