Search

By size

Inside diameter, mm:
From To
Outside diameter, mm:
From To
Height (width), mm:
From To
Prices are valid for 26.04.2024

Bearing 62203 2RS. Analogue 180503 according to GOST. Marking 62203 rs, 62203 ee

Bearing 62203 2RS - ball single-row, designed for radial loads. From bearing 6203 it is more wide: 16 mm versus 12 mm, therefore it can be searched as a wide 6203. Closed with rubber covers (plastic seals), which protect the rolling elements and tracks from ingress of small debris and dust. Also reliably protected from moisture and water due to the tightness of the plugs. The operating temperature range is determined by the lubricant applied at the factory; the standard limit is +120 degrees Celsius. Additional lubrication during the operation is not required, since it is possible to cause a confluct of lubricants and significantly shorten the service life of the product. In addition, in the case of opening the bearing manufacturer’s warranty does not apply.

For lightly loaded nodes with low rotational speeds, it is allowed to use inexpensive bearings of such companies as CRAFT Lithuania or CX Poland. Products of medium category companies - for example, ZVL Slovakiaили FBJ Japan - Suitable for old cars and agricultural equipment. In case the product is installed in expensive equipment, the use of expensive brands is recommended: SNR France (marked 62203 EE), TIMKEN USA, FAG Germany or SKF Sweden.

чертеж подшипник 6205 rs 180205

Dimensions and main characteristics of the bearing:   
Internal diameter d - 17 mm;  
Outer diameter D - 40 mm;  
Bearing height/width B - 16 mm;  
Mass m - 0.083 kg;  
The maximum rotational speed in plastic lubricant npl - 12000 rpm;  
Capacity in dynamics C - 9.56 kN;  
Capacity in statics Co - 4.75 kN.


Widely used in the old Soviet technology:

  • RAF buses (2203, 22032, 22038, 22031) - engine cooling system, 2 pcs;
  • cargo small car Moskvich 434 and 2733 - water pump engine, 1 or 2 pieces;
  • combine KSK100A-A1 - upper rollers, gearshift lock, divider drive, tension mechanism, 2 pieces per unit;
  • GAZ24 cars (2 pieces per fan), ZAZ (965 different series, 968) - 2 pieces per generator, Moskvich (2138, 412, 2136, 427) - 2 pieces per engine water pump;
  • car LuAZ 696-M - generator bearing, 2pcs.

This position exists only in one variation - closed with rubber seals.


All articles

Last articles

The bearing ex206g2 is a ball bearing that serves as a support for the shafts, its body consists of two rings that are connected by a cage.

Bearing es207g2 is fastened a ball bearing. The bearing consists of two parts – races, inner and outer, connected by a cage. It is self-installing (housing).

The es208g2 bearing is a ball bearing that is attached to the shaft. The two parts, called races, inner and outer, connected by a cage, make up its body.

GE ..- KRR-B snap-in bearings in a wide range with analogues at affordable prices