Bearing E 10
Bearing E 10 -angular contact ball bearing in the form of balls. The bearing is open, the separator is made of brass. The inner ring and balls in the separator are removed. Analogue of marking according to GOST - 6010. Not to be confused with radial ball bearings 6010 (110 according to GOST), whose dimensions are 50x80x16. Possible option, closed with metal washers - 16100 ZZ, in this case, a lubricant was applied at the factory.
In Soviet times, produced by the 4GPZ plant, which is rarely found at the moment. Manufacturers of bearings Е10 and 16100ZZ of the company VBF, SMB, KG are presented on our site.
Main characteristics:
Internal diameter d - 10 mm;
Outer diameter D - 28 mm;
Height/width B - 8 mm;
Mass m - 0, 260 kg;
The bearing structure of the E 10 allows you to perceive the radial and axial loads in both directions from the axis of the shaft. Radial ones are also perceived at high bearing rotation speeds.
E10 bearings were widely used in Soviet-made Raketa vacuum cleaners.
All articles
Bearing es207g2 is fastened a ball bearing. The bearing consists of two parts – races, inner and outer, connected by a cage. It is self-installing (housing).
The es208g2 bearing is a ball bearing that is attached to the shaft. The two parts, called races, inner and outer, connected by a cage, make up its body.
GE ..- KRR-B snap-in bearings in a wide range with analogues at affordable prices
