Search

By size

Inside diameter, mm:
From To
Outside diameter, mm:
From To
Height (width), mm:
From To
Prices are valid for 06.12.2020

Bearing fans gas boilers 626 ZZ 6x19x6

   Before the heating season, and even more often during the heating season, it becomes necessary to replace the bearing 626 ZZ with dimensions of 6 * 19 * 6, which is installed in the fan of the room heating boiler. To select the bearing you need to go very carefully, because you can stay in an unheated room. We suggest using the following bearings 626ZZ1MC3E Japanese brand NSK, which has the necessary thermal gap C3 and is filled with grease for the entire period of operation. Analogs of this bearing 626-2Z-C3 SKF (swedish brand), 626-ZZ-C3 SNR (french brand).
https://www.youtube.com/watch?v=Wj-qoL60Dr8
All these bearings have proven themselves from the best side. They can be purchased 
there

  Permanent supplier is a guarantee of constant quality!


All articles

Last articles

The bearing ex206g2 is a ball bearing that serves as a support for the shafts, its body consists of two rings that are connected by a cage.

Bearing es207g2 is fastened a ball bearing. The bearing consists of two parts – races, inner and outer, connected by a cage. It is self-installing (housing).

The es208g2 bearing is a ball bearing that is attached to the shaft. The two parts, called races, inner and outer, connected by a cage, make up its body.

GE ..- KRR-B snap-in bearings in a wide range with analogues at affordable prices