Search

By size

Inside diameter, mm:
From To
Outside diameter, mm:
From To
Height (width), mm:
From To
Prices are valid for 26.02.2021

Bearing 6001 2RS

The bearing 6001 2RS (in accordance with GOST 180201) is the single-row radial ball bearing, perceiving the radial load. It is closed from two parties by rubber-metal washers, than it is protected from hit of dust, dirt, water. They also prevent the lubricant from leaking out of the bearing, but the lubricant is designed for the entire service life of the bearing. Opening and lubricating is additionally not recommended, as due to excess lubrication, the bearing will warm up during operation. We can bearing 6001 2rs1 buy. Such a bearing comes with an increased thermal clearance and is marked 6001 2rs c3. This modification is applied at increased loads and increased heat generation in the area of ​​the working node. Bearing dimensions 12x28x8 are shown in millimeters. We recommend to get the bearing 6001-2rs skf. The manufacturer “SKF” is a world leader in the sale of bearings, has been working on the market for more than a hundred years. Depending on the manufacturer, different markings are possible:

6001-2rs – FLT, FBJ, CX (Poland).

6001 2RSRZVL (Slovakia).

6001 DDUNSK (Japan).

6001-2rsh SKF (Sweden).

6001 2NSENachi (Japan).

6001 LLUNTN (Japan).

 

Bearing dimensions

12 mm - internal diameter d,

28 mm - outer diameter D,

8 mm - bearing height B.

Bearing weight - 0.022 kg.


 

<!--[if !supportAnnotations]-->
<!--[if !supportAnnotations]-->
<!--[endif]-->

All articles

Last articles

The bearing ex206g2 is a ball bearing that serves as a support for the shafts, its body consists of two rings that are connected by a cage.

Bearing es207g2 is fastened a ball bearing. The bearing consists of two parts – races, inner and outer, connected by a cage. It is self-installing (housing).

The es208g2 bearing is a ball bearing that is attached to the shaft. The two parts, called races, inner and outer, connected by a cage, make up its body.

GE ..- KRR-B snap-in bearings in a wide range with analogues at affordable prices