Bearing 6206 2RS. Analogue 180206, 6206rs, 6206 closed, 6206 llu, 6206 ddu

Bearing 6206 2RS - ball single row closed type. Plastic protective plugs (rubber) prevent the ingress of dirt and moisture into the internal cavity, ensure the safety of lubricant applied at the plant, and prevent its leakage. It is widely used in auto and agricultural machinery. Analogue in accordance with GOST - 180206. Installation is possible instead of the open bearing 6206.
Products inexpensive brands can be used in nodes with low loads. For nodes of high responsibility, in expensive equipment, at high revs and loads, it is recommended to use the premium line (FAG, SNR, KOYO, SKF).

Depending on the manufacturer, different labeling options are possible:

• 6206 DDU - PPL Poland;
• 6206 DDU CM - NSK Japan;
• 6206 2RSR - FAG Germany;
• 6206 2NSE - Nachi Japan;
• 6206 EE - SNR France;
• 6206 2RS1 -  SKF Sweden.

Drawing and type of bearing 6206 RS

Main characteristics:

Internal diameter d - 30 mm;

Outer diameter D - 62 mm;

Width B - 12 mm;

Mass m - 0.201 kg;

Loading capacity in motion (dynamic) C - 19.6 kN;

Load capacity at rest (static) Co - 11.2 kN;

Rotation frequency in plastic lubricant npl - 7500 r / min;

The rotational speed in the lubricant lubricant nж is 13000 rpm.

Bearings 180206 are used in: steering of trucks MAZ (5322, 55512, 5336, 5434); the cardan shaft of GAZ buses (3221, 322172, 32212), GAZ trucks (3302, 2217, 27057, 32217), GAZ cars (31029, 3110, 31105). It is used simultaneously in several key assemblies of such combines as the Yenisei-1200 (bunker neck, reaper rod, knife rocker), Ear (idler pulley, bunker screw), Don-1200 and Don-1500 (reel variator pulley, fan counterdrive, breaker idler bitter), KZS-3 (front and rear counterdrives), KSK-100A / A1 (hydraulic pumps, reel), Niva (knife rocker, drum shaft in the gearbox housing); at the potato sorter with bulkhead tables (separators and conveyors). It is installed in CLASS import combines (COMMANDOR, DOMINATOR, LEXION, MEDION, MEGA, TUCANO of various series), CLAAS balers (Markant, Quadrant, Rollant, VARIANT of various series), CLAAS harvesters (3.х, 4.х, 5 series .x, VARIO HYDRO, VARIO SOLO).

The following design variations are possible (in parentheses are marking according to GOST):

6206 (206) -open;
6206 N (50206) - open with a groove on the outer ring;
6206 NR (50206) -open with groove and retaining ring;
6206 ZNR - closed with a metal washer on one side, with a groove and a retaining ring;
10N6206F11B -closed with a rubber cover on one side, with a groove under the ring;
6206 ZZ - closed on both sides with metal lids;
6206 ZZ C3 -closed on both sides with metal, with a thermal clearance of C3;
6206 2RS C3 -closed rubber seals, with a thermal clearance of C3.